Additional options available:

Geotextile fabric under the surface of the greenhouse

Crushed stones below the perimeter of the base

Buried wire mesh around the perimeter of the greenhouse

Cedar base

Cedar mulch in/around the greenhouse

Our greenhouses are generally installed directly on the ground, here are the advantages of this practice: 

• The water used in the greenhouse is naturally evacuated through the ground

• Plant roots have unlimited access to grow

• Insects and earthworms can help aerate and fertilize your plants

The whole thing retains the natural advantages of an outdoor garden, while having the practical aspects of a greenhouse (protection, automation, heating, layout, etc.) 

But in order to install the greenhouse in this way, here is the option ''Installation on treated wood base'' which is absolutely essential .

We set the base perfectly level and square in order to mount the greenhouse. It is also fixed to the ground by large steel rods to prevent any movement during high winds. 

There are several options available to you for your base: 

In order to preserve your base and keep it from coming into direct contact with the humidity of the earth, we strongly suggest installing it on crushed stones (perimeter of the base). Here are the options: 

• We can share with you the plan of the base as well as the approximate number of bags of stones needed so that you can prepare the crushed stone surface before we arrive. Customers usually have 30 kilo bags of 3/4 net crushed stone delivered by their local hardware store. (We will arrive with the base and install it before setting up the greenhouse) 

• We can take care of the surface preparation upon arrival. Crushed bags must already be on site, provided by the customer. Additional costs depending on the model

As you can see in the pictures, several additional options regarding the base are available (price depending on model): 

• Geotextile fabric under the greenhouse surface

• Geotextile fabric under the perimeter of the greenhouse

• Buried wire mesh around the perimeter of the greenhouse (requires several additional bags of crushed stone)

Although it is rare, some clients undertake the construction of their base. In this case, we share the plan of the base as well as the approximate number of bags of stones needed so that they can prepare it before our arrival. (The base must absolutely be level, square and anchored to the ground)

In order to improve pollination and ventilation , we offer this option of traps which are practical, robust and very chic . 

These hatches are on hinges and have a small hook and a chain to adjust the desired opening . 

We also screened the opening to prevent unwanted small animals from entering the greenhouse. 

These polycarbonate hatches are now included in all our models in the Suburb or Rural range (wooden hatches optional)

For the Urban model (10' wide) without this option, the front and rear wall bottoms are fixed and made of polycarbonate. 

Here is our automatic opening option, which is located at the highest point of the greenhouse, above the door. This autonomous system is practical especially during the fall, when the plants are mature and the outside temperature is cold. For people who like to have peace of mind, you can leave your windows closed and this system will open if the internal temperature rises too much, letting the heat escape until a comfortable room temperature for the plants. 

Details and maintenance: 

- It is a system that works by thermal expansion , so no need for electricity or batteries.

- It is a supplementary system and not a system that will regulate the temperature of the greenhouse all year round (in summer you will still have to open the greenhouse windows) .

- As maintenance, the cylinder should be removed when not in use for a long time and oiled a few times.

- The system allows for an opening of about 12'' of the window and the window hole has a small opening, but is located at the highest point of the greenhouse, so where the heat is.

- There will be no mesh in the opening as this would prevent the installation of the system.

- In order to create a better venturi effect , we offer a system on each side of the greenhouse. 

In order to properly arrange the interior of your urban greenhouse, here are some cedar growing trays. 

These perfectly fill the available space in the greenhouse. We offer combos to fully develop the surface area of ​​our greenhouse models. Depending on the width of the greenhouse, there are three or four rows of bins as well as a longer bin for the back wall. Some customers prefer to remove the back bin since there is a door, but to make the most of the growing space , it is better to keep it!  

Our trays are bottomless to allow the roots to seek out their nutrients in the soil and to drain the watering water well.

Here are the dimensions and prices of the bins (per unit) depending on the model: 

• Urban (10' wide):   $139.95 per unit / 1.8 ' ' width x 47'' length x 15'' height

• Suburban (12' wide): $169.95 each / 2 6 '' width x 47'' length x 15'' height and 30'' width for central aisle bins

• Rural (16' wide): $189.95 per unit / 30'' width x 47'' length x 15'' height 

We also offer vegetable garden bin combos that offer a discount of almost 15% compared to purchasing individual bins! (Price depending on model and length of the greenhouse)

The lighting circuit includes the installation of a system of LED growing lamps, designed specifically for greenhouse cultivation.  

These lamps have a full spectrum between 400nm and 800nm, infinitely close to sunlight , to improve growth performance for all stages of plant growth (from germination to flowering) . 

The lighting system includes:

• 4, 6, 8, 10 or more LED lamps (depending on the length of the greenhouse)

• Installing the lamps

This system is easily connected to a regular house extension , but you need to provide a power supply to connect the two circuits (one on each side of the greenhouse)